Quick answer
Architectural metalwork is custom steel and other metals fabricated as visible design elements: steel window and door frames, interior glazed partitions, screens and panels, shelving, fireplace surrounds, cladding and trim. Unlike hidden framing, it is judged on flatness, weld finish, consistent reveals and surface treatment, so the finish level must be specified and priced from the start.
Key points
Steel-framed windows, doors and interior glazed partitions
Laser-cut and perforated screens, privacy panels and facade elements
Floating shelves, bookcases, range hoods, fireplace surrounds and built-ins
Finish levels defined up front, using AESS categories where helpful
Mild steel, stainless, weathering steel, brass and aluminum
What counts as architectural metalwork?
We use the term for any metal element whose appearance is a primary design goal. That spans a wide range: a slim steel window wall separating a kitchen from a study, a perforated screen shading a stair, a blackened-steel fireplace surround, open shelving that appears to float off a wall, or a steel reveal trim around a doorway.
Many of these pieces also carry load. A floating shelf cantilevers off hidden steel bars anchored to framing. A glazed partition supports heavy glass and a sliding door. A screen on a facade resists wind. So while the brief is aesthetic, the fabrication still starts with structure and anchorage, which is where our steel framing experience pays off.
What sets architectural work apart is tolerance and finish. A frame that is out of square by a sixteenth of an inch may never matter structurally but will show against a glass panel or a tile line.
Steel window frames and glazed partitions
Interior steel-and-glass partitions are one of the most requested details in current residential and office design. They borrow from old factory windows: narrow steel mullions, tempered or laminated glass and often a matching swing or sliding door.
We build these from steel tube, angle, tee and flat bar, sized for the glass weight and span. Key decisions include whether glass is set with removable stops or glazing tape, how the frame anchors to floor, ceiling and walls, and how a door hangs without racking the frame. Door hardware, especially pivots and sliding tracks, should be selected before fabrication so we can build in reinforcement.
Exterior steel windows are a different product category, involving thermal performance, weather seals and often manufactured systems. For exterior work we usually fabricate surrounds, sunshades or subframes that work with a window manufacturer's units.
Screens, panels and perforated facades
Screens filter light, add privacy and give a building texture. We fabricate them from laser-cut or perforated plate, flat bar grids, expanded metal or woven mesh, set into steel frames that can be fixed, hinged or sliding.
Pattern and open area are design choices, but they have practical effects. A dense pattern gives privacy and blocks wind poorly, which increases loads on the frame and anchors. A very open pattern may look lighter but give less shade. For exterior screens we size frames and anchors with your engineer and pick a finish that will not streak or stain the wall below.
Panels can also be used as guard infill, pairing with our railings and guardrails work, as long as the pattern meets the opening rules for guards.
Fireplace surrounds, shelving and built-ins
Steel is a natural match for fireplaces because it is non-combustible and can be formed into crisp, thin profiles. Surrounds must still respect the clearances specified by the fireplace or insert manufacturer and the local code, so we work from those documents rather than from appearance alone.
Floating shelves look effortless and are anything but. Each shelf typically rides on steel bars or a welded plate anchored deep into studs, blocking or masonry. Wall construction must be known before fabrication, and blocking is best installed during framing. Range hood covers, kitchen open shelving, steel-clad islands and integrated bookcases follow the same approach: structure first, then finish.
We coordinate closely with millworkers and cabinet makers on these pieces, matching their reveals and installation sequence.
Specifying finish: AESS and visible welds
The single biggest source of disappointment in exposed steel is a mismatch between what the designer pictured and what was specified. To avoid that, we discuss finish level in concrete terms. For structural steel left exposed, AISC's Code of Standard Practice defines categories of Architecturally Exposed Structural Steel, known as AESS, that describe increasing levels of finish.
In broad terms, AESS 1 covers basic exposed elements, AESS 2 covers feature elements viewed from a distance, AESS 3 covers feature elements viewed up close, and AESS 4 covers showcase elements where welds are contoured and blended and surfaces are filled and smooth. A custom category lets the designer define specific requirements.
Even for smaller interior pieces that are not structural, these categories are a useful shorthand. Each step up adds grinding, filling, careful handling and surface preparation, which adds cost. Specify the highest level only where people will see and touch the steel.
Weld treatment: as-welded, ground flush, or contoured and blended
Mill scale: left on for a dark industrial look, or removed for a uniform surface
Edges and corners: sharp, eased or radiused
Surface finish: clear coat, wax, blackening, patina, paint or powder coat
How a architectural details job works with Iron Frame Welding
01
Design intent
We review drawings, reference images and finish expectations with the designer and agree on finish level for each element.
02
Sample and detail
A finish sample and detailed shop drawings lock in weld treatment, edges, reveals, anchorage and hardware before fabrication.
03
Precision fabrication
Pieces are cut, fit, welded and finished with protected handling so faces are not scratched or marked between stations.
04
Careful installation
We install after messy trades are done when possible, protect finished surfaces and coordinate glass, millwork and hardware.
Working with designers: samples, mockups and tolerances
For feature pieces we recommend a finish sample before full fabrication. A small panel showing the weld treatment, edge condition and finish lets the designer and client approve exactly what they will get. Raw and blackened steel vary from sheet to sheet, so a sample also sets expectations about natural variation.
For large or repetitive pieces, such as a long run of steel window wall, a full-size mockup of one bay can be worth the cost. It tests glass setting, hardware and installation sequence before the full order is built.
Metals beyond mild steel
Most architectural work is mild carbon steel because it is strong, weldable and takes many finishes. But designers sometimes call for other metals. Stainless steel resists corrosion and suits kitchens, coastal exteriors and handrails; it requires TIG welding, separate tools to avoid contamination and careful finishing to match grain. Weathering steel forms a protective rust patina outdoors but can stain adjacent surfaces. Brass and bronze add warmth for trim and hardware accents. Aluminum is light and corrosion-resistant but needs different welding and is less stiff.
Mixing metals requires attention to galvanic corrosion where dissimilar metals touch in wet conditions. We isolate them with gaskets or coatings when needed. If your project is in a humid, Gulf-influenced setting such as Houston, material choice deserves extra thought.
Frequently asked questions
How do I keep raw steel from rusting indoors?
Raw steel indoors is usually sealed with a clear lacquer, a wax or a penetrating oil after mill scale is removed or blackened. In dry interiors this performs well. Bathrooms, kitchens near sinks and entryways are harder, and a clear powder coat or a painted finish may be a better choice there.
Can a steel partition include a door?
Yes. Swing doors, pivot doors and sliding doors are common. The frame must be stiff enough to support the door without racking, and hardware must be selected before fabrication so we can reinforce hinge, pivot or track locations. Heavy glass doors may need a header tied back to structure above.
What does AESS mean on my drawings?
AESS stands for Architecturally Exposed Structural Steel. It is a set of finish categories in AISC's Code of Standard Practice describing how exposed steel should be fabricated and finished, from basic exposed elements to showcase pieces with blended welds. The category affects cost, so confirm it reflects where the steel will be seen.
Do you fabricate pieces designed by someone else?
That is most of our architectural work. We fabricate from designers' and architects' drawings and contribute fabrication knowledge during shop drawing review, such as suggesting a joint location or material size that makes a detail easier to build without changing its appearance.
Can you match an existing steel finish in my home?
Often, yes, with a sample process. Blackened and patinated finishes vary with steel batch and application, so we make test panels and adjust until the match is acceptable. Exact matches to aged finishes are not always possible, and we will tell you if a perfect match is unlikely.
How far in advance should architectural metalwork be planned?
Bring us in during design development. Many pieces need blocking, embedded plates or steel hidden in walls that must be installed during framing. Waiting until finishes are underway often means opening walls or choosing less ambitious details. Early involvement also gives time for finish samples and mockups.